Managing Analyses

This topic describes how to generate and monitor analyses to create unscheduled reports. I

In this topic:

Run a manual AFA analysis

The following procedure can be run for a device, group or matrix. The information applies both to manually initiated and scheduled analyses.

By default, when a group or matrix analysis is generated manually, AFA generates a new analysis for each member of the group or matrix, and then also generates a group or matrix analysis.

In addition, you can merge individual reports for members of a group or matrix into a new group or matrix report.

Do the following:

1. In AFA, navigate to the device, group, or matrix for which you want to create the an analysis.

2. In the OVERVIEW tab, click Analyze.
   The Analyze dialog is displayed:
   

   Note: The Analyze dialog varies between devices; not all analyze dialogs are identical to the one shown.

3. Specify the Analyze dialog fields as follows:

Field	Description / Action
Select risk profile	Select a specific risk profile to use when performing the analysis, or use the default Standard profile. Default: Standard. See Add a new risk profile
Avoid e-mail notification	By default, AFA sends email notifications when an analysis is complete. Select this option to avoid sending emails for this analysis.
Analyze [device, group, matrix] based on existing reports	Relevant only for group or matrix reports. Select to aggregate existing reports from the group or matrix members instead of generating new reports.

4. Click Start Analysis to start generating the report. The analysis status is displayed at the top right of the screen.

5. When the analysis is complete, open it by clicking the link at the top of the screen, or from the REPORTS  tab.

Back to top

Analysis Status and Related User Actions

The analysis status is shown using the indicator at the top right of the page:

indication	Purpose
	Shows that an analysis is in progress. See View the Progress of an Active Analysis. To abort a currently running analysis. See Abort an analysis.
	Shows that the last analysis that was being run was failed. When an analysis fails, AFA provides failure logs. See View Analysis Failure Logs.
	Shows that the last analysis run completed successfully. AFA provides a Report AFA reports. During the analysis process, support files are also created and are available if needed. see View Support Files. For a general description of AFA log and configuration files, see Access log and configuration files
	An analysis was never run.

Back to top

View the Progress of an Active Analysis

When an analysis is in progress, the Analysis indicator shows a spinner. A progress bar is displayed beneath, with a link for viewing status.

Back to top

Abort an analysis

An analysis that is running can be stopped by administrators.

1. Open the Analysis Status page by clicking on Analysis Status in the toolbar.

   The Analysis Status page is displayed with a table of recent analyses, including all active analyses.

2. At the right of the row of the active analysis to be aborted, click Abort Analysis.
   

3. On the detailed confirmation message, Click OK to proceed with aborting the analysis.

   The analysis stops.

Back to top

View Analysis Failure Logs

1. Click at the upper right of the page .

   A link to report logs appears.

   

2. Click View log .

Back to top

View Support Files

When AFA successfully completes an analysis, monitoring, or log collection, you can view the support files.

1. Click , , or at the upper right of the page.

   A link to the support files is displayed.

   

2. Click the View support files.

Back to top