Prepare an AlgoSec Hardware Appliance

This section describes how to prepare an AlgoSec hardware appliance before continuing with your deployment.

Do the following:

Review the contents of the shipping carton, technical specifications, and appliance elements. For details, see:
- Shipping carton contents
- AlgoSec 2nd generation appliances technical specifications and elements or AlgoSec 3rd generation appliances| Technical specifications and elements
Mount the appliance on the rack, with the AlgoSec logo facing front.
Connect one end of the power cable supplied to the power jack on the appliance's rear panel. Plug the other end into an electrical outlet.

Do one of the following:

Configure the appliance via iLO

(Recommended)

Do the following:

Connect one end of the network cable supplied to the iLO port on the appliance's front panel.
Connect the other end of the cable to a network port.

Configure the appliance directly

Do the following:

Use a VGA cable to connect a monitor to the video port on the appliance's rear panel.
Connect a keyboard to one of the USB ports on the appliance's front or rear panel.

Shipping carton contents

Each AlgoSec hardware appliance comes in a shipping container with the following items:

A Hardware appliance

One of the following AlgoSec hardware appliances:

Power cables

2x power cables

Note: An iLO license is available for each unit.

iLO provides additional features for controlling and maintaining the appliance.

The appliance comes loaded with the latest SPP version of iLO at time shipping.

This section includes:

	2203	2403
CPU	20 cores: Intel Xeon Silver 4114	40 cores: Intel Xeon Gold 6138
Memory	64GB	128GB
LAN Port	4 x 10/100/1000 Ethernet	4 x 10/100/1000 Ethernet
Video connection	1 x VGA	1 x VGA
USB	Front: 1 USB 3.0 + iLO service port Rear: 2 USB 3.0 Internal: 2 USB 3.0	Front: 1 USB 3.0 + iLO service port Rear: 2 USB 3.0 Internal: 2 USB 3.0
Power Supply	500W PSU redundant	800W PSU redundant
Storage	5 x 1200GB	8 x 1200GB
H/W Raid	RAID 5	RAID 5
Redundancy	RAID, Dual CPU, Power Supply	RAID, Dual CPU, Power Supply
Form Factor	1U 8-SFF Rack form factor	1U 8-SFF Rack form factor
Dimensions (HxDxW)	4.29 x 43.46 x 70.7 cm 1.69 x 17.11 x 27.83 in	4.29 x 43.46 x 70.7 cm 1.69 x 17.11 x 27.83 in
Weight (maximum)	8 SFF 16.27 kg (35.86 lb)	8 SFF 16.27 kg (35.86 lb)
Operating Temperature	10° to 35°C (50° to 95°F)	10° to 35°C (50° to 95°F)
Operating Humidity	8% to 90%	8% to 90%

Element	Description
	Power On/Standby button with a LED whose state indicates the appliance's power status: Flashing. The appliance is initializing. On. The appliance is on. Off. The appliance is off.
	A LED whose state indicates the appliance's hard disk status: Flashing. The hard disk is in use. Off. The hard disk is not in use.
	Video connector.
	USB ports.
UID	Unit ID button (activates Unit ID LED on the rear panel).
	Health LED.
iLO	iLO /NIC connector.
	NIC activity LED.

Element	Description
Power jack	Two power jacks for supplying power to the appliance (that is, redundant PSUs).
ETH2 ETH3 ETH4	Ethernet ports. When a HA cluster is configured, one port can be used to connect the Primary and Secondary appliances.
	Four USB Ports.
	Serial connector (inactive)
	Video connector
UID	Unit ID LED (activated by Unit ID button on the front panel).

This section includes:

* Certified network transceiver for use when fiber infrastructure is unavailable: HPE 10GBASE-T SFP+ 30m RJ45 Transceiver - 813874-B21.
	(3240)	(3480)
CPU	24 cores: Intel Xeon Silver 4410Y	48 cores: Intel^® Xeon^® Gold 5418Y Processor
Memory	128GB	192GB
LAN Port*	2 x 10Gb/s Ethernet (fiber)	2 x 10Gb/s Ethernet (fiber)
Video connection	1 x VGA	1 x VGA
USB	Front: 1 USB USB 3.2 Gen1 + iLO service port Rear: 2 USB 3.1 + iLO Management port Internal: 3.2 Gen1 + 2.0	Front: 1 USB 3.0 + iLO service port Rear: 2 USB 3.1 + iLO Management port Internal: 3.2 Gen1 + 2.0
Max power load	516.98W 1763 BTU/h	848.12W 2892 BTU/h
Power Supply	800W PSU redundant	800W PSU redundant
Storage	4 x 1.6TB NVMe	4 x 3.2TB NVMe
H/W Raid	RAID 5	RAID 5
Redundancy	RAID, Dual CPU, Power Supply	RAID, Dual CPU, Power Supply
Form Factor	1U 8-SFF Rack form factor	1U 8-SFF Rack form factor
Dimensions (HxDxW)	24.1 x 60 x 99 cm	24.1 x 60 x 99 cm
Weight (maximum)	System 16 kg (Packaged system 24.5 kg)	System 16 kg (Packaged system 24.5 kg)
Operating Temperature	10° to 35°C (50° to 95°F)	10° to 35°C (50° to 95°F)
Operating Humidity	8% to 90%	8% to 90%

AlgoSec 3rd generation appliances front panel elements

#	Element	Description
1	iLO	USB iLO connector.
2		Power On/Standby button with a LED whose state indicates the appliance's power status: Flashing. The appliance is initializing. On. The appliance is on. Off. The appliance is off.
3		Health LED.
4		A LED whose state indicates the appliance's hard disk status: Flashing. The hard disk is in use. Off. The hard disk is not in use.
5	UID	Unit ID button (activates Unit ID LED on the rear panel).
6		USB ports.

AlgoSec 3rd generation appliances rear panel elements

10	Element	Description
1	UID	Unit ID LED (activated by Unit ID button on the front panel).
2		USB Ports.
3	iLO	Ethernet iLO port
4		Serial connector (inactive)
5	OPT1 OPT2	Ethernet fiber ports. When a HA cluster is configured, one port can be used to connect the Primary and Secondary appliances.
6		Video connector
7	Power jack	Two power jacks for supplying power to the appliance (that is, redundant PSUs).

â See also: