Customize the regulatory compliance report

AFA provides regulatory compliance reports for a variety of regulatory compliance standards. These reports can be accessed from the Regulatory Compliance report page of each AFA report.

Remove and add compliance reports

Do the following:

1. In the toolbar, click your username.

   A drop-down menu appears.

2. Select Administration.

   The Administration page appears.

3. Click the Compliance tab.

   The Compliance page appears.

4. Click the Compliance Options sub-tab.

5. Next to Regulatory compliance reports to be included in the device analysis, click Select.

   The Regulatory Compliance Reports dialog is displayed.

   

   For a description of each standard, see Supported regulatory compliance reports.

6. To enable a report, select its check box.

7. To disable a report, clear its check box.

8. Click Save.

Supported regulatory compliance reports

Standard	Description
US Centric
SOX	Sarbanes-Oxley Act (SOX) compliance is required for publicly traded companies on US markets.
NERC CIP v3, v4, v5	Required for Power manufacturing and distribution, including Oil, Gas and Nuclear. The customer may choose to analyze against either v3, v4 or v5 of the NERC CIP standards, to evaluate readiness for future standard deadlines.
HIPAA	Required for protecting patient data in US healthcare companies.
NIST SP 800-171	This report uses the National Institute of Standards and Technology (NIST) document Protecting Controlled Unclassified Information in Nonfederal Information Systems and Organizations, Revision 1 (June 2015).
NIST SP 800-53	Required by US DoD. This report uses the National Institute of Standards and Technology (NIST) Security and Privacy Controls for Federal Information Systems and Organizations, Revision 4 (April 2013).
NIST SP 800-41	Required by US DoD. This report uses the National Institute of Standards and Technology (NIST) Guidelines on Firewalls and Firewall Policy, Revision 1 (Sep 2009).
GLBA	Consumer identity safety requirements for US companies.
Europe Centric
ISO/IEC 27001	ISO/IEC 27001 formally specifies an Information Security Management System (ISMS), a suite of activities concerning the management of information security risks.
Basel-II	This addresses the Basel Committee on Banking Supervision's framework International Convergence of Capital Measurement and Capital Standards (June 2006).
BSI 200	This addresses the recommendations from the German Federal Office for Information Security (BSI) on methods, processes, procedures, approaches and measures for information security as laid out in the BSI standard 200-1 information security management systems (ISMS) and its supplementary standard, the BSI standard 200-2 IT-Grundschutz methodology.
GDPR	This addresses the European Parliament and the Council of the European Union's regulation, on the protection of natural persons with regard to the processing of personal data and on the free movement of such data.
Global
PCI DSS 3.0	The Payment Card Industry Data Security Standard (PCI DSS) was developed to encourage and enhance cardholder data security and facilitate the broad adoption of consistent data security measures globally. PCI DSS provides a baseline of technical and operational requirements designed to protect cardholder data. You can optionally indicate which servers are in your PCI zone. Specifying these servers enables AFA and AppViz to provide you with more specific security information for PCI applications. See Configure the PCI zone.
SWIFT	The SWIFT Customer Security Programme (CSP) supports customers in the fight against cyber-fraud. The CSP establishes a common set of security controls designed to help customers to secure their local environments and foster a more secure financial ecosystem.
Australia Centric
ASD-ISM	Firewall configuration guidelines from Australian Government.
Japan Centric
J-SOX	Japanese version of SOX.
Singapore Centric
MAS-TRM	Guidelines for information security for Singapore operating banks, published by the government banking regulator.
Hong Kong Centric
HKMA	Guidelines for information security for Hong Kong operating banks, published by the government banking regulator.
Brazil Centric
LGPD	Guidelines for the protection of personal data as stipulated in the General Data Protection Law of the Federative Republic of Brazil.

Customize the compliance score value

AFA reports' Regulatory Compliance page displays a compliance score which indicates the device's degree of compliance with each compliance report. AFA calculates the compliance score with the following formula:

Compliance score = (X1 + WX2)/(X1 + X2 + X3)

You can customize the compliance score value by changing the value of the "W" variable.

Do the following:

1. In the toolbar, click your username.

   A drop-down menu appears.

2. Select Administration.

   The Administration page appears, displaying the Options tab.

3. Click the Advanced Configuration tab.

   The Advanced Configuration tab appears.

   

4. Click Add.

   The Add New Configuration Parameter dialog is displayed.

   

5. In the Name field, type Compliance_Score_Star_Weight.

6. In the Value field, type the value you wish to assign to the "W" variable.

7. Click OK.

8. Click OK.

Customize compliance score severity thresholds

AFA provides the ability to customize the compliance score severity thresholds.

By default, a bad score is 55% and below (red), a moderate score is between 55% and 70% (yellow), and a good score is 70% and above (green).

Do the following:

1. In the toolbar, click your username.

   A drop-down menu appears.

2. Select Administration.

   The Administration page appears, displaying the Options tab.

3. Click the Advanced Configuration tab.

   The Advanced Configuration tab appears.

   

4. To adjust the threshold for a bad score, do the following:

   1. Click Add.

      The Add New Configuration Parameter dialog is displayed.

      

   2. In the Name field, type Compliance_Score_Max_Red.

   3. In the Value field, type the maximum value for a bad score.

      For example, if you want a score of 60% and below to be a bad score, type 60.

   4. Click OK.

5. To adjust the threshold for a good score, do the following:

   1. Click Add.

      The Add New Configuration Parameter dialog is displayed.

   2. In the Name field, type Compliance_Score_Min_Green.

   3. In the Value field, type the minimum value for a good score.

      For example, if you want a score of 80% and above to be a good score, type 80.

   4. Click OK.

6. Click OK.

Configure the PCI zone

Specifying the servers in the PCI zone enables AFA to specify the vulnerability of PCI applications in the PCI regulatory compliance report. Additionally, configuring these servers enables AppViz to tag which network objects intersect the PCI Zone and the applications that use these servers.

Do the following:

1. In the toolbar, click your username.

   A drop-down menu appears.

2. Select Administration.

3. The Administration page appears, displaying the Options tab.

4. Click the Compliance tab.

   The Compliance tab appears, displaying the Risk Profiles sub-tab.

5. Click the Compliance Options sub-tab.

6. In the Regulatory Compliance area, in the PCI zone field, type an IP address, range, or CIDR.

7. To add another entry, click , and type the additional value in the field.

8. To remove a field, click .

9. In the Vulnerability level threshold field, select the threshold for acceptable vulnerability in the drop-down menu.

Applications with the selected vulnerability level (or lower) will be considered vulnerable in PCI reports. For example, selecting Medium will cause applications with medium or low security scores to be considered vulnerable.